MIURA   JAPANESE   

Marine composite boiler
GK
GK-1428~2730
Actual Evaporation
Oil Fired Side: 500~1,500kg/h
Exh.Gas Side: 400~1,400kg/h
GK

Structure of Ablecompo

We adopt the simple vertical water tube type. On M/E Exh. gas side, the water tubes are arranged around the upper and lower drum in consideration of good heat efficiency. Exh. gas from the flue duct flows right and left side separately (W FLOW) and the heat exchange is completed. After that, it becomes the low temp. Exh. gas and flows out. On the burner side, heat absorption is acted on water tubes with w FLOW structure, after combustion and heat radiation heating in the combustion chamber consisted of the most inside water tubes.

Main Features

  1. High efficiency
    On the burner side, 80% and more boiler efficiency is secured by the newly developed boiler proper, and gas flow speedup promotes the heating improvement. Soot blower is arranged on the Exh. gas side water tubes, and then good efficiency operation is realized
  2. Compact size
    The newly developed boiler proper shortened the boiler height. The boiler weight also was reduced.
  3. Long life
    The water tube structure with reasonable strength brings about long life.
  4. Wide stream chamber
    The wide steam space brings about the strong structure against the load change.
  5. Sequencer control
    The sequencer control brings about the compact control box, and raises the reliance.
  6. Maintenance
    The Exh. gas outlet on the burner side is designed to face sideways and it improves the maintenance. Moreover, in case of troubles, the boiler operation is possible by plugging and the water tubes can be replaced easily.

Air Soot Blower

  • High press. Air soot blower proposal.
    The fixed branch soot blower is arranged on Upper and Lower tube plate, and high press. air from them blows into the water tube shaft to remove the soot effectively. High press. air from lower also blows up the soot deposited on the plate to the flue duct. On the center of water tube, the fixed or turning air soot blower is arranged to remove the soot around the center. Prevention of sulphur corrosion and effective soot removal are realized, because water is never used for the soot blower.
UPPER NOZZLE
UPPER NOZZLE
MIDDLE NOZZLE
MIDDLE NOZZLE
LOWER NOZZLE
LOWER NOZZLE



▲Page top